Main page // About Us//Projects// Facilities// Factory // Contact us // Jobs // فارسی

An Introduction to Kanrood-Sazeh Steel Structures Manufacturing Factory of Abbasabad Industrial Town

The Steel Structures Manufacturing factory of Kanrood-Sazeh is located in Abbasabad Industrial town consisting of a land of 15000 m2 including,   5000 m2 of roofed saloons, which are equipped with 4 overhead cranes, 10 tons each , 6000 m2 open  storage  to  store  materials  and  ironware  and  1300 m2 administration  area  and  dormitory .

The factory has a highly specialized workforce who work under the supervision of the technical office. The plant produces industrial structures, galleries, pipe racks, reservoirs, bridges, special steel structures and complex welded steel segments. The annual capacity of the plant is 3000 tons, which can be increased to 5000 tons upon need. Also  this  factory  has  the  capacity  of  producing  7000  tons  of  different  kinds  of   I  and  H  profiles annually  , by  using  full  automatic  assembly  lines .

 The sequence of work in the plant is as below:

v     Cutting the steel straps with computerized shear apparatus from standard plates

v     Cutting and beveling of cut steel with two peak automatic shear apparatus.

v     Cutting the stiffeners and related additions of different structures with the multipurpose IRON WORKER machine.

v     Chassis building and preparation of fixtures for the assembly of parts.

v     Assembling the plate girders.

v     Segments  assembling  ( Automatic  assembly  lines  are  used  for  heavy  H & I  steel  profiles )

v     Welding the  plate girders with submerged arc weld.

v     Straightening  the  plate  girders  by  using  H-beam  straightening  machine . By  this  machine , any  possible  curvatures  resulting  in  the  welding  process  will  be removed  in  both   X & Y  axis  in  the  girder  plates  with  the  maximum  thickness  of  40 mm .  

v     Drilling flanges, base plates, plate girders with radial drills and magnet drills.

v     Accessory, finishing parts, columns joints and beam joint assembling according to the approved drawings.

v     Welding of joints according to welding procedure specifications (PQR , WPS).

v     Performing non-destructive tests (VT, PT, RT, UT) according to project requirements.

v     Finishing , sandblasting and painting according to project requirements.

v     Final quality control.

v     Manufacturing  pallets  &  packing  all  constructed  segments

v     Attaching  packing  list  on  equipment  packing .

v     Shipping and transporting the parts of prefabricated steel structures to site.

During all manufacturing procedures, the experts are in close collaboration with the manufacturing and quality control engineers in the production line to assist them in their joint efforts to control the production with respect to quality, quantity, time schedules and complying with acceptable tolerances mentioned in the drawings and specifications. These engineers also perform periodic checks and quality controls. They also collaborate with the project client representatives to make any required adjustments or reworks prior to delivery and transportation. Along with concerns for the safety precautions according to the company's HSE manual, all personnel and work groups are insured against accidents, injuries and casualties with their normal social security insurance.

Steel Structures Manufacturing Factory Tooska St., Jami St., Delgosha St., Abbasabad Industrial Town, 35th km of Khorasan Rd, Tehran , Iran
Tel:   0292 342 3244
Fax:  0292 342 3245